|
Product Details:
|
| POWER: | 3W;4W | Radiant Angle: | 120° |
|---|---|---|---|
| SUBSTRATE: | Ceramic | CCT: | Blue;Royal Blue |
| IF: | 700mA;1000mA | CIRCUIT: | 1PCS In Series 1PCS In Parallel |
| High Light: | 60LM/W 3535 LED Chip,700mA High Power LED 4W,1000mA High Power LED 4W |
||
3535 465-475nm 440-450nm 700mA 1000mA 3W 4W high power led
| models | LN-SMD3535SB-P3-LP | LN-SMD3535SB-P4-LQ | LN-SMD3535RB-P3-E45 |
| POWER | 3W | 4W | 3W |
| CCT |
Blue=465-475nm |
Blue=465-475nm |
Royal Blue=440-450nm |
| LUMINUOUS EFF | 30-40LM/W | 50-60LM/W | 1000-1200mw |
| IF | 700mA | 1000mA | 700mA |
| VF | 3.0-3.4V | 3.0-3.4V | 3.0-3.4V |
| CIRCUIT | 1PCS in series 1PCS in parallel |
1PCS in series 1PCS in parallel |
1PCS in series 1PCS in parallel |
| LES | R3.0MM | R3.0MM | R3.0MM |
| VIEW ANGLE | 120° | 120° | 120° |
| SUBSTRATE | Ceramic | Ceramic | Ceramic |
| WHOLE SIZE | 3.5*3.5MM | 3.5*3.5MM | 3.5*3.5MM |
Design Advantage:
Cautions 1w high power led chip, 3w high power led chip
1) Soldering Conditions
Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and Second soldering process.
2) Static Electricity
It is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs.All devices, equipment and machinery must be properly grounded.Damaged LEDs will show some unusual characteristics such as the forward voltage becomes lower, or the LEDs do not light at the low current. Criteria : (VF > 2.0V at IF=0.5mA)
Q1: Do you supply OEM,ODM service?
A1: YES,absolutely it can be realized.
Q2: All the pictures are real photo?
A2: Yes, the pictures of all products on this page are 100% real shoot by us.
Q3: How can I get a quotation from you?
A3: Please kindly leave us messages about your needs,including products and quantity,our professional team will reply you very soon (mostly within few hours).
Contact Person: Devin
Tel: +86-15818602704
